Can you replace a presta valve

To determine if you have a Presta valve with a removable core, look at the valve stem. If the core is removable, the valve will consist of two parts — upper and lower. On a presta valve there is a wide threaded part that the lock ring attaches to. And a narrower part with the valve lock nut above it that the cap threads onto. So, how do you tell whether a Presta valve has a removable core? Well, if you look at the valve, you may notice that there are two flat sides on the narrowest part.

If there are two flat sides, this means that the core can be removed. Presta valves are fragile That sucks. Make sure your getting it seated and locked properly before you pump. Because the two valve types are different, they require two different types of head on a pump — or, as is often the case, an interchangeable head. Add your deal, information or promotional text.

Home Journal. Previous Next. Check The Valve Core While the valve core is removed, check it. Replace With New Valve Core When installing the new or cleaned valve core, make sure it's fully tightened.

Inflate To An Accurate Tire Pressure With a now clean valve core, which allows uninterrupted airflow, you can easily inflate the tire to get an accurate reading of tire pressure. Related Blog Posts.

Spring Bike Maintenance. Warmer temperatures have arrived here in the northern hemisphere and spring is upon us. As you get ready for the riding season, here are a few simple tips to make sure your bike is ready so you have a good experience as enjoy the spring weather.

Some of you may not have touched your bike since last fall, others may spent hours on a trainer, and some may have rode through the winter. Regardless the situation these basic maintenance tips will help you get started this spring. Read more. Summer Riding - How to Stay Cool. Here's the question of the day, to ride or not to ride? You can think of a hundred reasons not to ride, it's already 90 degrees outside and no clouds, I'm tired, didn't sleep well last night, my back hurts, I can ride tomorrow, I'm bored riding the same route over and over again.

Sound familiar? If you must install a Presta tube in a Schrader rim to get home, use the valve nut to secure it close to the rim. A Presta-only pump has a rubber gasket in the head, or chuck, that will fit snugly around a Presta valve but not a Schrader. One side is narrower for Presta valves. Simply unscrew the chuck cap, flip the gasket to the side that matches the valve, and screw the cap back on. Just press the head firmly onto the valve, flip the lever to secure, and start pumping.

And suspension pumps are so small that it would take forever to inflate a Schrader tire. Most valves are already attached to tubes, so swapping one means replacing the whole tube. However, there are two scenarios that may require a valve replacement:.

Most local bike shops have replacement cores for sale. Bikes and Gear. United States. Type keyword s to search. Today's Top Stories. Are Wider Tires Always Faster? Related Story. Bicycle tubes with Presta, left, and Schrader, right, valves.

You may be able to find the same content in another format, or you may be able to find more information, at their web site.

A Woods or Dunlop valve.